Sennheiser RS 220 digital wireless headphones

Macworld Australia Staff
29 February, 2012
View more articles fromthe author
AAA
Press Release

February 2012 – Australian: High-end audio fans attach great importance to loss-free transmission of the sound signal between the source and the ears. In the past, wireless audio transmission has come up against its limits. Now however, audio specialist Sennheiser is opening up a new class of wireless listening with the new RS 220 wireless headphones. The digital wireless headphones have a full, detailed sound while offering total freedom of movement.

Headphone development is driven by the challenge of reproducing sound that is as lifelike and direct as possible. Up until now, cabled headphones had a far better audio quality than wireless headphones. But now, the RS 220 from Sennheiser is setting new standards. “With these digital wireless headphones, we have succeeded for the first time in combining wireless music enjoyment with high-end quality,” said Wayne Farran, Sales & Marketing Manager at Syntec International, describing the new RS 220.

Superior wireless listening pleasure

Many years of experience in the field of wireless transmission and audio technology have gone into the development of the new digital headphones. Dynamic transducers with powerful neodymium magnets ensure clear, lifelike audio reproduction with a frequency response of 19 to 21,000 hertz. The maximum sound pressure level of the open, circumaural headphones is 106 decibels. In the RS 220, the transmitter sends the audio signals to the headphones without compression via a stable 2.4 GHz connection using the so-called Direct Sequence Spread Spectrum (DSSS) technique. “This is a frequency spreading process in which the output signal is spread to a width of 22 MHz by means of a specified bit sequence. If interference occurs at one point within this frequency range, the output signal experiences no interference as the data is transmitted with redundancy, in other words several times. As a result, only a minimal and inaudible part of the whole information is affected and the overall sound quality is not influenced,” explained Wayne Farran. The headphones have a range of up to 100 metres without the need for the transmitter and receiver to be in the same room. A further advantage of the transmission process is the low latency and thus minimum delay of the audio signal.

Choice of several connection possibilities

The sound quality of a set of headphones is decisively dependent, among other things, on the connection between the audio source and the headphones. As the data between the transmitter and receiver is transmitted wirelessly in the RS 220, the feeding of the data from the audio source to the transmitter is particularly important. For this reason, the headphone system has an analogue, a coaxial digital and an optical digital input. Discerning users can decide themselves on the type and quality of the audio signal being fed in. Sensor buttons on the transmitter or directly on the headphones enable users to switch back and forth between the sources.

Lifelike sound experience

An important means of creating a musical effect is the transition between quiet and loud passages, as can be heard for example in Ravel’s Bolero. Conventional digital data transmission sometimes reduces this dynamic range, as an optimum signal volume for the entire data package is often assigned to the information when the analogue signal is converted into a digital data package. To preserve the original dynamics of a piece of music, the RS 220 completely dispenses with the automatic level control function. The data of the digital sources is transmitted unchanged, and the user can manually adjust the reference volume for the analogue inputs. As a result, the system comes very close to the audiophile ideal: a lifelike sound experience.

Maximum comfort

Operating the RS 220 is extremely easy. An on/off switch, controls for selecting the audio source and tracks, as well as a volume control are directly integrated into the headphones. There is also a control to individually adjust the volume balance between right and left. Setting up the wireless headphones for the first time is equally easy. Simply connect the transmitter to the audio or video device using the chosen connector, put on the headphones and switch on. The headphones come with rechargeable batteries that guarantee up to eight hours of listening enjoyment and which can be conveniently recharged while still in the headphones. As an added feature, the transmitter can also be used to supply a second optional set of headphones – for shared listening pleasure.

You can find all the latest information on Sennheiser by visiting our website at www.sennheiser.com.au

The Australian RRP is $ 649.95

Leave a Comment

Please keep your comments friendly on the topic.





Resource Centre

  1. Introducing layout themes and styles in FileMaker Pro 13

    FileMaker Pro, help, inspector, macworld australiaIf you are reading this, you are most likely aware of the benefits offered by FileMaker Pro 13, from streamlining your business’ data to organising projects, but how do you make your FileMaker Pro and FileMaker Go database solutions look the part?

    This is where layout themes and styles come in.

    Would you like the layout to show your business logo when your employees are entering data into the database? Would you like to create conformity across all pages, maybe with a colour theme that matches your business?

    In order to increase usability for your database, a well-designed layout will make the solution both appealing to look at, but also more efficient – as those entering or viewing data will be able to easily navigate the fields in front of them.

    What is a style?

    In FileMaker Pro, a style is the way a layout object, layout part and the database’s background appear. This encompasses the colour or transparency of objects and backgrounds, the style of line used within the layout, the borders of objects and parts, the shape of objects, the shadows outside or inside an object’s border, and the display state of an object.

    For example, when your draw a square on your layout, the initial appearance of the square will be determined by the theme currently being used by the layout. The colour of the square, the lines that define it and any shadow that appears are all differing styles that add up to make a theme.

    The initial theme is called the default and ensures that all objects added to the layout carry a similar look. So, if you add a second square to the layout, it will have the same colour and borders. Though this does not have to be the case if you would like to differentiate them.

    And a theme?

    A theme is the collection of a number of styles used in a layout. Themes are the full picture of how your layout or report appears, and encompass all of the individual styles applied to objects, parts and the background. The theme does not affect the way a layout functions, but when you apply a theme to a layout it will alter the way it looks and feels.

    Making alterations

    Adjusting a style in a theme is very simple. If you click on the object, layout part or background you would like to alter, open the Inspector and head to the Appearances tab, you will see the Style label field at the top. This indicates the current style.  If no changes have been made, it will likely read as ‘Default’.

    Alter the style of the object, layout part or background by editing the property settings on the Appearance tab of the Inspector. Once you have made your layout look the way you would like, select the red arrow that will have appeared as you were making your changes and click ‘Save As New Style’.

    Type in a new name for your style and press OK. Continue to create as many additional styles as you would like in your layout. If you would like to apply a style to multiple objects or modify a style slightly between two objects, your previous styles will be available in the Styles list on the Style tab of the Inspector.

    Once you have made all of the changes you would like, you have the option of creating a new theme or saving the changes to the current theme.

Contact us