Troubleshooting: Installing Mac OS X Lion

Ted Landau
9 August, 2011
View more articles fromthe author
AAA
Help

Mac OS X Lion is easier to install than any previous version of Mac OS X. You don’t have to boot from a DVD or flash drive. Just download the Install Mac OS X Lion app from the Mac App Store and let it walk you through the remaining steps.

Still, things can – and occasionally do – go astray.

One possible hitch right away is that you’ll need to have the Mac App Store application on your drive. This requires that your Mac be running OS X 10.6.6 or later.

Assuming you pass this hurdle, the next place where things may go wrong is during the installation process itself. In particular, you may get one of several warning messages.

Install app warnings

This disk cannot be used to start up your computer

Apple offers no explanation as to why the installation may balk here, other than to say it can happen in ‘some situations.’ However, Apple does provide a solution: Restart your Mac, launch Disk Utility and, from the Partition tab, slightly reduce the size of your startup partition (by as little as 128MB). You should now be able to install Lion. When done, you can restore the partition to its previous size. If this resizing trick fails, you will likely need to reformat the drive.

This disk is used for Time Machine backups

This message again means that the Lion installation will not successfully complete. The message can appear even though your startup drive is obviously not acting as a Time Machine backup. As covered in an Apple Support Communities thread, the likely cause is an errant Time Machine-related Backups.backupdb folder at the root level of your drive. This folder, created by and used by Time Machine, is fooling the Install app into thinking your startup drive is actually a Time Machine backup. The solution is to delete the folder.

Some features of Mac OS X Lion are not supported for the disk (volume name)

If this message pops up, you’ll still be able to install Lion. However, as explained by Apple, the installer won’t be able to create a Recovery HD partition. Recovery HD is used for performing ‘emergency’ options, such as reinstalling Mac OS X or running Disk Utility. While you can install and run Lion without this partition, ideally you want to have it. Aside from its troubleshooting value, it’s required if you want to use File Vault 2.

This error can occur if your startup drive is a RAID volume or has a ‘non-standard’ Boot Camp partition. If you have a RAID setup and want to keep it, you have no choice but to forgo Recovery HD on the drive. If Boot Camp is the cause, the solution is to reformat your drive as a single partition. Next, reinstall Snow Leopard followed by an update to Lion. Now run Boot Camp Assistant to create a Boot Camp partition. Lastly, restore your remaining data from backups.

If you can’t or don’t want to reformat, an alternative is to install Lion on an external drive. If you ever need to boot from Recovery HD, you do so from the partition on the external drive.

Install failed. Mac OS X Lion couldn’t be installed, because the disk (volume name) is damaged and can’t be repaired. Click restart to restart your computer and try installing again.

If you see this unwelcome message, chances are slim that trying again will lead to success. The same is true if the Install application simply stalls before completing. Some users report that ‘zapping the PRAM‘ is sufficient to get past this roadblock. Otherwise, according to an Apple Support Communities thread, the fix is to boot from a Snow Leopard Install disc/drive and select to Repair Disk from Disk Utility. Assuming repairs are successful, try the Lion installer again.

Otherwise, if nothing here has any positive effect (and assuming the drive itself is not physically defective), the solution is to reformat the drive and start over.

Internet connection lost

Although not likely, you may lose your internet connection after an otherwise successful install of Lion. If you use Avast’s Web Shield, the solution is to uninstall avast!. There is a known conflict between Avast and Lion. As posted in an Avast forum thread, a supposed bug-fix update, still in beta, is available. In this same thread, the company lays the blame on Apple: “Packet forwarding is broken on Lion. Lion either does not redirect the packets (your case) or crashes. These bugs have been reported to Apple a long time before the Lion release, but it is still not fixed by Apple.”

If you don’t use Avast, a more general potential fix is to turn off the Mac OS X Lion Firewall (in Security & Privacy System Preferences), and delete the firewall-related com.apple.alf.plist file in /Library/Preferences (via Terminal if needed). After a restart, you can re-enable the Firewall.

Redownload Lion?

For installation failures that could be due to a corrupt copy of the Install Mac OS X Lion app, you should redownload a fresh copy of the app and try again. However, if a copy of the Install app remains on your drive (which is likely if you have been unable to complete a successful install), the Mac App Store will claim that Lion is ‘Installed’ and will not permit a redownload. In fact, it is likely to make this claim even if you have never attempted to install Lion after downloading the Install app.

To work-around this, delete the the Install app. Next, from the Mac App Store app, hold down the Option key and select the Purchases tab. You should now see the Install Mac OS X Lion app listed with a download option enabled.

7 Comments

7 people were compelled to have their say. We encourage you to do the same..

  1. Robert Hutchison says:

    As I have always been keen to have the latest OS upgades and ensuring I ticked all the download requirements, and believing that downlaod was the ownly way to upgrade, I purchased the download and started. This has proven to be a major problem as I represent that small percentatge of the australian population that can only connect through wireless broadband which in the country is a contridiction. There is nothing broad or fast with country wireless. Telstra is the only carrier I can access and there download limits and bandwith restriction effectively mean days of broken connections to only find yoy have exceeded your download limit and have to wait to get you limit again. Now that I have paid for the download option, still have not completed the download after many disconnections living 2.5 hrs from Melbourne (Apple Store) and apple saying that a usb drive option will soon be available at what cost to me. Download does not suit everyone.

  2. Robert Hutchison says:

    As I have always been keen to have the latest OS upgrades and ensuring I ticked all the download requirements, and believing that download was the only way to upgrade, I purchased the download and started. This has proven to be a major problem as I represent that small percentage of the Australian population that can only connect through wireless broadband which in the country is a contradiction. There is nothing broad or fast with country wireless. Telstra is the only carrier I can access and there download limits and bandwidth restriction effectively mean days of broken connections to only find you have exceeded your download limit and have to wait to get you limit again. Now that I have paid for the download option, still have not completed the download after many disconnections living 2.5 hrs from Melbourne (Apple Store) and apple saying that a USB drive option will soon be available at what cost to me. Download does not suit everyone.

  3. meinrosebud says:

    Nope, I’m using Avast on my iMac with Lion and the network is flying along!

  4. cassandra says:

    How come Front Row ceases to exist on Lion.? When I did use it I appreciated it.

  5. cassandra says:

    How come we have lost Front Row?

  6. Hyrom Jones says:

    I have “rebuilt” my Macbook Air, (the model with the SSD-2010). I have been forced to re-format the HDD and again attempted to re-installed Lion each time, ALL WITHOUT success. I have now re-installed Leopard successfully from Time Machine. Now all is OK ??? I think I shall stay with Leopard for a while. When installing Lion, the “blue line” indicating installation progress, travels to within about 4-5mm from the final end and then the process stops (ie: hangs) with the beach ball spinning and does not proceed. This requires a full (forced) shutdown and a re-start, which begins the entire “painful” process, all over again. Hence I go into Disk Utilities, to Re-format, Repair etc. Any ideas ? I wonder if anyone else has experienced this problem with their Macbook Air ?

  7. errol says:

    Since I’ve downloaded and installed osx lion I cannot open a bible application that I have been previously running with crossover.

Leave a Comment

Please keep your comments friendly on the topic.

Contact us